Charnwood BD610 Belt & Disc Sander, 6″ x 10″

You Will get 349 Points On Completing This Order


    • 9.96 £
    • 9.96 £
    • 9.96 £
    • 9.96 £
    • 6.67 £
    • 8.33 £
    • 8.33 £
    • 8.33 £
    • 8.33 £
    • 10 £
    • 17.46 £
SKU: BD610 Categories: , ,

Charnwood BD610 Belt & Disc Sander, 6″ x 10″

Free Shipping to Mainland UK


A heavy duty workshop sander, with the traditional combination of belt and disc, driven via belt by a quiet 1hp induction motor.

The large diameter disc is fitted with a sturdy aluminium table which is secured on both sides. Radiused guides allow the table to tilt to 45 degrees and be accurately locked at any angle. The table also has a T slot for the mitre guide, which is adjustable to 60 degrees each way.    

A sanding belt of this size would most commonly be used in the horizontal position, however it can be moved into the vertical position when required. The belt has a back stop fence with a removable plate, allowing the user to make their own plate to suit any application they have.

The open end of the sanding belt can be used for finishing curved shapes and edges.

When the time comes to replace the sanding belt there is a quick release tension lever and fine tracking adjustment to balance the new belt.

Given that there may be times when you need to move this machine off the work bench, the design incorporates a pair of carry handles.

A single dust collection outlet gives efficient extraction, from both the disc and belt, when connected to a suitable vacuum or extractor. 

The sander sits on 4 rubber feet or can be secured to a work bench using the 4 mounting points provided.

Supplied with mitre guide, 1 x 80 grit sanding belt, 1 x 80 grit self adhesive sanding disc, 1.75m power cable and UK 3 pin plug. 

BD610 Specification

Disc Diameter

250mm (10”)

Disc Speed


Work Table Size

330mm x 170mm

Work Table Tilt

90 – 45 degrees

Work Table T Slot

16mm / 20mm

Belt Size

150mm x 1220mm (6” x 48”)

Belt Speed


Motor (Induction) 240v, 50hz

750w (1hp)

Dust Extraction Outlet

50mm OD / 45mm ID

Overall Dimensions (WxDxH)

770mm x 570mm x 400mm

Shipping Dimensions

740mm x 460mm x 470mm






1 Year

To connect this machine to a dust extractor using 100mm diameter hose, use adapter 100/58RC.

We recommend wearing a face mask or respirator during all sanding operations, even if a dust extraction system is in place. Don’t take chances with your health.

Additional information

Weight 0.00000000 kg
Dimensions 0.00 × 0.00 × 0.00 cm


There are no reviews yet.

Be the first to review “Charnwood BD610 Belt & Disc Sander, 6″ x 10″”

You may also like…