Charnwood W711 Bandsaw

1 customer review


SKU: Charnwood W711 Categories: , ,


Charnwood W711 Bandsaw

New stock due in Marc 2022, We are now taking Pre-Orders

Home workshop bench top woodworking bandsaw, light enough to move off the bench after use.

  • Precision Ground Cast Iron Table

  • Quick Lock Fence

  • Quiet Induction Motor

  • Crosscutting Mitre Guide Included

  • 3” Cutting Depth

  • 8″ Cutting Width (Throat)

  • Supplied with a High Quality Blade

A compact sized yet accurate cutting woodworking bandsaw with a durable precision ground cast iron tilting table, including a T-slot mitre fence channel. The quick release fence locks onto both front and rear of the table to provide a straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The blade guard can be adjusted using just one hand with the hand wheel located at the rear of the machine. A great feature on this small bandsaw is the easy access to the blade guides and rear thrust bearing which controls the bandsaw blade during the cut and keeps it cutting in a straight line. A durable powder coated paint finish will keep it looking good in your workshop for many years.

Our W711 woodworking bandsaw is supplied with rip fence, sliding crosscut mitre fence adjustable 60 degrees each way, 1/4″ British made blade, NVR switch, 40mm diameter extraction outlet, cable and plug. The dust kit converts the outlet for use with a 100mm extractor system.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.


 Maximum cutting depth

 80mm (3”)

 Throat width

 200mm (8”)

Max. cutting width with fence

95mm Left / 95mm Right

 Table size

 300mm x 270mm

 Table tilt


Mitre Guide T-Slot

9mm / 14mm

 Cutting speed


 Motor (induction)

 300w (0.4hp)

 Blade length


 Blade widths

 6-10mm (1/4″-3/8″)

 Dimensions (WxDxH)

 440mm x 400mm x 700mm






1 Year

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. It is possible to use this bandsaw for cutting metal but only with the correct blade fitted. (not supplied)


Additional information

Weight 25.00 kg
Dimensions 40.00000000 × 44.00000000 × 70.00000000 cm
Motor Power

Blade Length

Max Cutting Depth

Blade Speed

Blade Width

Max Width of Cut

Table Size

Table Tilt

Wheel Diameter

Extraction Outlet


1 review for Charnwood W711 Bandsaw

  1. chris lumsden

    Fantastic quality product. Would recommend.

Add a review