Charnwood W796CF – W796 Dust Extractor With 1 Micron Cartridge Filter


W796CF – W796 Dust Extractor With 1 Micron Cartridge Filter

FREE Shipping on this item

Package Deal – Save £20

Packing includes:

W796 1hp Professional Dust Extractor

CF1519 1 Micron Cartridge Filter

W796 is a portable dust and chip extractor aimed at the professional workshop needing to extract from one machine at a time.

Professional Quality Motor

Can Run up to 8 Hours a Day

Ample 1000m3/hour Flowrate

Quiet Induction Motor

Transparent Collection Bag

2m Length of Hose Included

Highly recommended for MDF users this unit is suitable for fine dust or chip producing machinery such as double mitre saws, sanders, routers, table saws, bandsaws and spindle moulders.

Using the now upgraded 2 micron fine mesh cotton filtration bag and a see through heavy gauge plastic collection bag both fastened by quick release metal straps, the workshop will be not only a cleaner environment but a healthier one as well.

Supplied with ‘indestructible’ steel fan, 2m length of 100mm diameter flexible hose, 2 hose clips, 100mm inlet, transparent collection bag, 4 steering castors, cable and plug. Runs on a standard 13 amp fused supply.

Please Note : Hose is Left Hand thread so for quick connector use 100QCL


Motor (Induction)                                            750w (1hp)

Voltage                                                                  240v

Flowrate (cubic metres per hour)              1000 m3/hour

Inlet                                                                        100 mm

Bag Capacity                                                        70 Litres

Collector Drum Diameter                              370mm

Dimensions (WxDxH)                                     780mm x 390mm x 1370mm

Weight                                                                   36 Kg

Rating                                                                    Trade

Warranty                                                              1 Year

CF1519 cartridge filter can be used to upgrade any chip extractor with a 370mm diameter collection drum. Replace the cloth filtration bag with a cartridge to increase the filtration performance down to a super fine, 1 micron particle size. The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.

This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range.  The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.

The cartridge is very simple to install, simply remove the cloth bag and support arm on the extractor then fit the cartridge in its place. A metal quick action clamp secures the cartridge in place.

To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging. 

We also have a large range of accessories available for connecting your dust extractor to the dust producing machinery. Reducers to join the 100mm diameter hose to the smaller diameter outlets usually found on bench top machinery. Hoods to collect dust from machinery with no purpose made collection points.

Additional information

Weight 0.00 kg