Charnwood W588 Planer Thicknesser

£279.00

Charnwood W588 Planer Thicknesser

 

A compact and portable planer thicknesser.

8” Planing Capacity

8” x 5” Thicknessing Capacity

Aluminium Tables To Minimise Weight

Extruded Guide Fence For Accuracy

Tilting Fence With Twin Guides

Rubber Coated Feed Rollers

100mm Diameter Chip Extraction Outlet

Light enough to move off the bench when not in use and yet tough enough to produce 8″ x 5″ timber into flat and dimensioned pieces. The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.

The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutterblock leaving a beautiful finish with no roller marks.

The dust hood is particularly good, fitting onto the thicknessing bed during planing operations and then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run.

Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, cable and plug.

Specification

Surfacing width                               200mm (8″)

Length of surfacing tables           740mm

Maximum depth of cut                 3mm

Fence tilt                                            90 – 45

Table height                                      360mm

Thicknessing capacity                   5 – 125mm (1/4″ – 5″)

Length of thicknessing table       270mm

Feed speed                                         8m/min

Maximum depth of cut                 2mm

Cutterblock speed                          8000rpm

Number of knives                           2

Motor (carbon brush)                  1500w, 240v

Dimensions (WxDxH)                  790mm x 420mm x 470mm

Weight                                               28kg

Rating                                                Hobby

Warranty                                          1 Year

  It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.

Additional information

Weight 0.00 kg
Dimensions 79.00000000 × 42.00000000 × 47.00000000 cm

Reviews

There are no reviews yet.

Be the first to review “Charnwood W588 Planer Thicknesser”