Chestnut Ebonising Lacquer Aerosol 400 ml

£7.94

9 in stock (can be backordered)

SKU: Chestnut Ebonising Lacquer Aerosol 400 ML Categories: , , , ,

Easy to apply hard wearing lacquer to mimic the look of Ebony

Ebonising Lacquer is a tough, hard-wearing water-based lacquer. It is heavily pigmented so that when it is dry it emulates the classic satin look of ebony.
Usually applied over a sanding sealer (either Cellulose Sanding Sealer or Acrylic Sanding Sealer aerosol) it is touch dry in about five minutes and hard dry after twenty minutes.
Although heavily pigmented it is not paint and will still allow the grain of the timber to show through, rather than obliterating it completely.
Liming Wax and Gilt Cream can be applied over Ebonising Lacquer to give a pleasing, eye-catching yet very simple artistic effect.
If a bright gloss finish is required from Ebonising Lacquer this is best achieved by using Burnishing Cream on the lacquer with will polish it up to a high gloss.
Acrylic Gloss Lacquer can also be applied on top of Ebonising Lacquer, as can WoodWax 22 and Microcrystalline Wax

 

Specifications

Typical uses
A satin, water-based lacquer which gives a very hard-wearing black finish to emulate the look of ebony.
Method of application
Aerosol
Drying time
Within twenty minutes under normal conditions.
Coverage
approx. 2-4 sq. metres per can
Compatibility
Can be used over Acrylic Sanding Sealer and Cellulose Sanding Sealer.
Tips
Be sure to avoid spraying over other items you do not want contaminated with black lacquer! On large areas apply in thin coats. This product can be used for exterior applications.
Thinners
Not applicable
Safety Considerations
Avoid inhalation of spray (see Safety Data Sheet or warnings on can for full details).

Additional information

Weight 0.50000000 kg
Dimensions 0.00000000 × 0.00000000 × 0.00000000 cm

Reviews

There are no reviews yet.

Be the first to review “Chestnut Ebonising Lacquer Aerosol 400 ml”