Quick drying, hard wearing full gloss lacquer.
When you’re looking for a hard-wearing, heat and water resistant, quick drying gloss lacquer you need look no further than Melamine Lacquer.
Based on cellulose technology, Melamine Lacquer has a catalyst suspended within it; when the lacquer is in the can it is inert but once applied and exposed to the air, the lacquer dries within five minutes like a cellulose and then the catalyst kicks in and the lacquer goes on to chemically cure to give a more durable coating. 90% of the curing process happens in the first seven days after application, making the lacquer very hard wearing, the remaining 10% of the process can take up to two weeks more to give maximum toughness, something you only need to consider if the lacquer is going to be subjected to extremely hard use.
Melamine Lacquer is designed to give a full gloss finish which will be achieved with a very careful application. It can be applied by brush (foam or bristle), cloth or by spraying. Where necessary, use Cellulose Thinners to dilute the product – especially helpful if working on a large area.
The gloss level of Melamine Lacquer can be increased by using Burnishing Cream once it has dried, and it can also be overcoated with Friction Polish (to increase the depth of the shine) or WoodWax 22 or Microcrystalline Wax (for a more natural feel).
A quick drying lacquer which gives a very hard-wearing gloss finish.
Method of application
Foam Brush, Brush, cloth or spray.
Within five minutes under normal conditions.
approx. 8-10 m² per litre.
Can be used over Cellulose Sanding Sealer. Once dried, the use of Burnishing Cream will give a higher gloss finish; WoodWax 22 may also be used on top of this product.
Thinning may be required when applying over a large area. Not suitable for exterior use. Conforms to EN71 for use on toys
Flammable (see Safety Data Sheet or warnings on can for full details).